Avaya J100 Series Скачать руководство пользователя страница 506

Страница: 506 / 528

Element
name

Attributes and values

Description

<go>

The following attributes are supported:

•

href

•

method

: specifies an HTTP method

used to obtain a deck.

The following values are allowed:

post

: the request data is appended

to the URL.

get

(default): the request data is

sent in the body of the request.

•

sendreferer

: if set to

true

, the URL

of the current deck is included in the
HTTP request in a Referer header.

The allowed values are the following:

true

false

(default)

A task element enclosed in the

<do>

element.

This element is not visually rendered.

<noop>

N/A

When the

<noop>

element is activated, no

task is performed.

This element is not visually rendered.

<prev>

N/A

When the

<prev>

element is activated, a

Back operation is invoked.

This element is not visually rendered.

N/A

When the

element is activated,

the card that contains this element is
redownloaded and rerendered. The History
Stack is not changed when a card is
refreshed.

This element is not visually rendered.

Table continues…

Customizable parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

506

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 506 / 528

Результаты поиска

Содержание J100 Series

Отзывы: