Avaya J100 Series Скачать руководство пользователя страница 88

Страница: 88 / 528

The two modes are as follows:

Alternate

: Supports registration to one of the active controllers.

Simultaneous

: Supports registration to both the active controllers.

•

Failback policy

: Specifies the fall back policy.

The two modes are as follows:

Auto

: Active controller automatically recovers after failback.

Admin

: Active controller uses failback policy defined by the administrator.

Note:

Failback policy is not supported in an Open SIP setup.

•

SIP proxy policy

: Specifies whether the settings of SIP proxy servers are taken from

the

46xxsettings.txt

file or can be edited by the user.

The two modes are as follows:

Auto

: The settings are taken from the

46xxsettings.txt

file. The user can only

view the settings.

Manual

: The user can edit, delete, or create new server properties.

•

User ID Field

: Specifies whether during logging in the

User ID

field will be displayed on

the phone screen or not.

7. Select

SIP proxy server

to change SIP proxy server settings.

Caution:

Do not configure proxy settings manually while a user is logged in to the phone.

The phone displays the IP address of the server that you selected.

8. Press

Select

and use the

and

Down Arrow

keys to view, add, or change the following

settings:

•

SIP proxy

: Specifies the IP address or DNS. The corresponding parameter is

SIP_CONTROLLER_LIST.

•

Protocol

: Specifies the type of protocol. The options are TCP or UDP. The

corresponding parameter is SIPSIGNAL.

•

SIP Port

: Specifies the SIP port. If no value is entered, SIP port uses 5060 as the

default port for UDP/TCP.

9. Press

Save

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 88 / 528

Результаты поиска

Содержание J100 Series

Отзывы: