manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 194 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 194

Parameter name

Default value

Description

SHORTCUT_ACTION_AUTODIAL

If ENABLE_BLIND_TRANSFER is set
to 1, the user can select between these
transfer types. If
ENABLE_BLIND_TRANSFER is set to
0, the user can make only an attended
transfer.

• 2: the active call is immediately

transferred to the destination. If this
value is used, it overrides the
ENABLE_BLIND_TRANSFER
parameter value.

• 3: the active call is put on hold, and the

call is established with the destination to
set up a conference.

• 4: the active or the held call is parked to

the destination by appending the Park
FAC with the destination extension
number.

Note:

This value (“4”) is supported only in
the Broadworks environment.

Active call soft key configuration

This feature allows you to configure soft keys that can be used during an active call to activate in-

call features with the help of DTMF. Using soft keys allows users to avoid remembering and

entering digital codes to activate in-call features.

You can configure this feature through the web Interface or in the 

46xxsettings.txt

 file. You

can configure up to 10 soft keys for in-call features.

Note:

IP Office in CCMS mode does not support this feature.

Configuration of DTMF soft keys in the 46xxsettings.txt file

Each soft key has a set of attributes that can be configured for the SOFTKEY_ACTIVE parameter:

• type: key type, mandatory
• action: dialing sequence, mandatory
• label: soft key label, optional

Configuration of DTMF soft keys through Web Interface

You can configure active call soft keys in the 

Softkey Configuration

 > 

Active Call Softkey

Configuration

 tab of the web Interface. The following settings are available:

• Key: numeric, read-only

Feature and application configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

194

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов