manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 169 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 169

Multicast Paging field description

Name

Description

Multicast Paging State

Specifies whether the Multicast Paging feature is
enabled on the phone. If Multicast Paging state is
not set, other settings related to the feature will be
ignored.

The options are:

•

Enable

•

Disable (default)

Multicast Paging Codec

Specifies a codec which will be used in Multicast
Paging transmissions.

The options are:

•

G.729 (default)

•

G.711u

•

G.711a

Multicast Paging Groups To Listen

If the Multicast Paging feature is enabled, you can
add, edit or delete incoming multicast page groups
in this section.

The configuration fields are equivalent to the
MP_GROUPS_TO_LISTEN value:

•

IP

: the multicast IP address of the group

•

Port

: the IP port of the Multicast Paging group.

The valid value is an even integer from 1024 to
65534.

•

Priority

: the group priority

•

Label

: the group label which the phone displays

when the incoming page is played

Multicast Paging Groups To Send

If the Multicast Paging feature is enabled, you can
add, edit or delete outgoing multicast page groups
in this section.

The configuration fields are equivalent to the
MP_GROUPS_TO_SEND value and control the
same settings as Multicast Paging Groups To Send
fields.

•

IP

•

Port

•

Label

Related links

Multicast Paging configuration

 on page 234

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

169

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов