manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 417 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 417

Parameter name

Default value

Description

PROVIDE_KEY_REPEAT_DELAY

0

Specifies how long a
navigation button must be
held down before it begins
to auto-repeat, and if an
option is provided by
which the user can change
this value.

Value operation:

• 0: Default (500ms) with

user option (default).

• 1: Short (250ms) with

user option.

• 2: Long (1000ms) with

user option.

• 3: Very Long (2000ms)

with user option.

• 4: No Repeat with user

option.

• 5: Default (500ms)

without user option.

• 6: Short (250ms) without

user option.

• 7: Long (1000ms)

without user option.

• 8: Very Long (2000ms)

without user option.

• 9: No Repeat without

user option.

Note:

Avaya J129 IP
Phonedoes not
support this feature.

Table continues…

List of configuration parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

417

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов