Anritsu BERTWave Series Скачать руководство пользователя страница 417

Страница: 417 / 466

A.3 Sampling Oscilloscope

A-21

ppe
ndi

x A

A.3.5 Utilities

Table A.3.5-1 Utilities

Item

Specifications

EYE/Pulse Shot

Saves Result screen image as jpg or png format image.

Inverse Background

Color

Saves EYE / Pulse Shot waveform area with reversing the color.

Waveforms Only

Saves only the waveform display area in the Result screen.

Waveform Color

Selects the gradation table of the waveform at the time of cumulative

setting.

Option:

Color Grade, Gray Scale

Color Select

Selects a basic color when Waveform Color is set to “Gray Scale”.

Option:

Yellow, Blue, Green, Pink, Orange, Light Blue, Light Green, Red

The color can be set separately for before and after adaptation of the TDECQ

equalizer.

Mask Color

Selects the color of Mask displayed at Mask Test.

Preset Information

Displays or hides the preset information in the waveform display area.

Label

Displays arbitrary character string on EYE / Pulse Scope screen.

Add Label

One label is displayed on one screen. The maximum number of characters is

1023 characters.

Delete Label

Deletes the displaying label.

Trace Memory

Stores measurement waveform in internal memory.

Trace Memory

“Set”:

Saves the waveform data of all displayed channels.

“Clear”:

Clears the saved waveform data.

Graph Display Mode

Switches the display mode.

“Overlap”: Displays waveforms of all channels on a graph.

“Single”:

Displays the waveform of the active channel.

“Tile”:

Splits the graph area in quarters and displays waveforms of

all channels in the separate split graph areas.

Control Ch

Switches the control channel mode.

“All”:

Applies changes to settings for all channels.

“Single”:

Changes settings for the active channel only. (Limited to some

settings)

A.3.6 Maintenance

Table A.3.6-1 Calibration

Item

Specifications

Calibration

Calibrates Amplitude (Offset and linearity calibration)

and O/E Module Calibration of dark current / current system

Application Test

Self-diagnostic function

Содержание BERTWave Series



















































































































































































































































































































































































































































































Результаты поиска

Содержание BERTWave Series

Отзывы:

Anritsu BERTWave Series, Руководство по эксплуатации, Страница: 417 / 466

Результаты поиска

Содержание BERTWave Series

Отзывы: