YASKAWA H6B1A002, Technical Reference

Page: 137 / 794

Startup
Procedure
and
T
est
Run
4
4.4 Keypad Operation
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference 137
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2.
Push (Menu).
3.
Push or to select [Monitors], then push .
4.
Push or to select [Analog Gauge], then push (Setup).
5.
Push .
6.
Push or to select the monitor number to register, then push .
Enter the three digits in “x-xx” part of monitor Ux-xx to identify which monitor to output. For example, to show
monitor U1-01 [Frequency Reference] , set it to "101" as shown in this figure.
The configuration procedure is complete.
◆
Show Monitors as an Analog Gauge
The following explains how to display the contents selected for a monitor as an analog gauge.