Xerox WC5545F, Service Manual

Page: 571 / 2320

August 2007
2-379
WorkCentre 5687 Family
11-012-130, 11-014-130, 11-315-130, 11-316-130
Status Indicator RAPs
11-012-130, 11-014-130, 11-315-130, 11-316-130 Compiler
Carriage Position Failure RAP
11-012-130 The compiler carriage is not at the home position.
11-014-130 The compiler carriage fails to move.
11-315-130 The carriage upper limit switch is actuated.
11-316-130 The carriage lower limit switch is actuated.
NOTE: The home position is with the compiler carriage at the upper limit position.
Initial Actions
• Check for damage or obstructions that would prevent the compiler carriage from moving,
Figure 2.
• Check that the upper and lower limit switches and switch actuators are not damaged, Fig-
ure 1. If necessary install a new compiler carriage assembly, PL 11.46 Item 1.
Procedure
NOTE: All HCSS interlocks must be made to 24V to the motors.
Enter dC330, code 11-315. Actuate the carriage upper limit switch, S11-315, Figure 1. The
display changes.
Y
N
Go to Flag 1. Check the switch.
Refer to:
• GP 13, How to Check a Switch.
• P/J415, HCSS PWB.
• 11C-130 HCSS Power Distribution RAP.
Install new components as necessary:
• Carriage upper limit switch, PL 11.44 Item 1.
• HCSS PWB, PL 11.56 Item 5.
Enter dC330, code 11-316. Actuate the carriage lower limit switch, S11-316, Figure 1. The
display changes.
Y
N
Go to Flag 2. Check the switch.
Refer to:
• GP 13, How to Check a Switch.
• P/J415, HCSS PWB.
• 11C-130 HCSS Power Distribution RAP.
Install new components as necessary:
• Carriage lower limit switch, PL 11.44 Item 10.
• HCSS PWB, PL 11.56 Item 5.
Enter dC330, codes 11-014 CC motor move up, then, 11-016 CC motor move down Figure 1.
The compiler carriage moves between the top and bottom limits.
Y N
Go to Flag 3. Check the compiler carriage elevator motor, MOT11-013.
Refer to:
• GP 10, How to Check a Motor.
• P/J415, HCSS PWB.
• 11C-130 HCSS Power Distribution RAP.
Install new components as necessary:
• Compiler carriage elevator motor, PL 11.44 Item 8.
• HCSS PWB, PL 11.56 Item 5.
Enter dC330, code 11-317. Actuate the Compiler carriage safety switch, S11-317, Figure 2.
The display changes.
Y
N
Go to Flag 4. Check the switch.
Refer to:
• GP 13, How to Check a Switch.
• P/J406, Carriage PWB.
• 11C-130 HCSS Power Distribution RAP.
Install new components as necessary:
• Carriage PWB, PL 11.46 Item 5.
• Compiler carriage safety switch, PL 11.47 Item 4.
Go to Flag 5, check the harness and connectors P/J410 and P/J434, refer to GP 7. The wir-
ing and connectors are good.
Y
N
Repair the wiring or install new components as necessary.
Perform SCP 6 Final Actions.