Xerox WC5545F, Service Manual

Page: 2206 / 2320

August 2007
6-314
WorkCentre 5687 Family
dC330
General Procedures & Information
Output Codes
11-431 Inserter Left Hand
Door Interlock HVF Insert left hand door interlock
(Q11-431) detects the state of the
inserter door interlock High = closed, low =
open
Table 9 Input codes 12
Code Displayed Name Description General
12-300 OCT Level Sensor OCT 90% full sensor (Q12-300)
detects when tray is 90% or more
full. High = 90% or more full,
low = less than 90% full
12-301 OCT Index Sensor OCT index sensor (Q12-301)
detects the offset and home posi-
tion of bin 1 High = tray moving from
home to offset, low =
tray moving from offset
to home
Table 10 Input codes 14
Code Displayed Name Description General
14-100 Carriage Home Sensor Scan carriage home sensor (Q14-
100) detects the home position of
the scan carriage
High - Home, low = not
home
14-310 DADH Angle Sensor Input module angle sensor (Q14-
310) detects the input module at
30% angle for size sensing. High = input module
lowered, low input mod-
ule raised
14-315 Doc Size Sensor 1 Document size sensor 1 (Q14-310) High = document not
sensed, low = document
sensed
14-320 Doc Size Sensor 2 Document size sensor 2 (Q14-314) High = document not
sensed, low = document
sensed
Table 11 Output codes 04
Code Displayed Name Description General
04-010 Main motor Drives the pre-registration, registra-
tion, developer, fuser and paper
output modules. On/Off. 60 seconds timeout
Table 12 Output codes 05
Code Displayed Name Description General
05-010 DADH feed sole-
noid
DADH feed solenoid (SOL05-010) On/off. 30 seconds timeout
Table 8 Input codes 11
Code Displayed Name Description General
05-020 DADH feed motor DADH feed motor (MOT05-020) On/off. 90 seconds time out
05-025 DADH feed clutch DADH feed clutch (CL05-025) On/off. Normally linked with
feed motor. 30 seconds time-
out
05-030 DADH CVT motor DADH CVT motor (MOT05-030) On/off. 90 seconds timeout
05-050 DADH duplex
solenoid
DADH duplex solenoid (SOL05-
050) On/off. 30 seconds timeout
Table 13 Output codes 06
Code Displayed Name Description General
06-020 ROS Motor Run Drives ROS motor at run mode
speed. On/off. 90 seconds timeout
06-025 ROS Motor
Standby
Drive ROS motor at standby mode
speed. On/off. 90 seconds timeout
Table 14 Output codes 07
Code Displayed Name Description General
07-010 T1 Elevate Motor Energizes the tray 1 elevator motor
(MOT07-010) up. On/off. Linked to tray 1
home sensor. Only ener-
gize with tray out. 5 seconds
timeout
07-020 T2 Elevate Motor Energizes the tray 2 elevator motor
(MOT07-020) up. On/off. Linked to tray 2
home sensor. Only ener-
gize with tray out. 5 seconds
timeout
07-030 T3 Elevate Motor Energizes the tray 3 elevator motor
(MOT07-030) up. On/off. Linked to tray 3
home sensor. Only ener-
gize with tray out. 10 sec-
onds timeout
07-040 T4 Elevate Motor Energizes the tray 4 elevate motor
(MOT07-040) up. On/off. Linked to tray 4
home sensor. Only ener-
gies with tray out. 10 sec-
onds timeout
07-373 Raise T5 Elevate
Motor
Energizes the tray 5 elevate motor
(MOT07-373) to move the tray up. On/off. Only runs while tray
transport limits are not
reached. 10 seconds time-
out
07-374 Lower T5 Elevate
Motor
Energizes the tray 5 elevate motor
(MOT07-373) to move the tray
down. On/off. Only runs while tray
transport limits are not
reached. 10 seconds time-
out
Table 12 Output codes 05
Code Displayed Name Description General