Xerox WC5545F, Service Manual

Page: 934 / 2320

August 2007
2-742
WorkCentre 5687 Family
OF4a
Status Indicator RAPs
03-551 Fax service is unavailable Image processing-FAX:
comms error. Fault 03-338 is
raised.
Perform 03-338 RAP
03-552 Tray 3 and 4 are unavail-
able. Please call for assis-
tance.
IOT microprocessor to HCF
comms error. Fault 03-359
raised Perform 03-359, 03-407
RAP
03-553 The BM is unavailable.
Please call for assistance.
HCSS-BM communications
failure. Fault 03-363 is raised. Perform 03-363 RAP
03-554 Network controller is initi-
ating. Power Off will be
available when initializa-
tion has completed.
Please wait.
Network controller powered up
but is still initializing. Fault 03-
340 is raised, and will clear
when initial is at ion is com-
plete If necessary, perform
03-340, 03-416 RAP
03-556 Please wait. The system
is attempting to recover
from a fault
Tray 1 & 2 comms error. Fault
codes 03-351 and 03-354 are
raised Perform 03-350, 03-
351, 03-354 RAP
03-557 Please wait - the system is
attempting to recover from
a fault
Tray 5 comms error. Fault 03-
366 is raised Perform 03-366 RAP
03-558 Copying is being pre-
vented by the Access
Control device
The foreign Interface is config-
ured and a connected 3rd
party accessory is reporting as
not enabled. Perform 03-412 RAP
03-559 Copying is being pre-
vented by the Access
Control device
This status occurs when there
is a status 03-558 and the sys-
tem contains non-held jobs
controlled by the Foreign Inter-
face The status clears when
the jobs are deleted. If
necessary, perform 03-
412 RAP
03-560 Software cycling control
fault. Printing is unavail-
able. If fault persists, call
for assistance. Touch
Ignore Error to use other
services / Printing is
unavailable
Laser on without printing. Fault
03-396 raised Perform 03-395, 396,
852, 853 RAP
03-561 An internal communica-
tions error has occurred.
Switch off the machine
and call for assistance
Image processing wall clock is
not incrementing. Fault 03-325
is raised. Perform 03-315, 325,
347, 348, 349, 355, 400
RAP
03-562 No message Image processing POST fail-
ure. NVM Integrity ASICEPC-
Failure. Fault 03-347, 03-348,
03-355 is raised. Perform 03-315, 325,
347, 348, 349, 355, 400
RAP
Table 3 03-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
03-563 An internal communica-
tions error has occurred.
Switch off the machine
and call for assistance
Image processing rotation
memory POST has failed Perform 03-315, 325,
347, 348, 349, 355, 400
RAP
03-567 Network scanning is
unavailable. Check
cabling connections
S2X job started but
S2X_Ready line not detected Switch the machine off
and on, GP 14. Check
the connections. If nec-
essary, perform 16A
03-568 Job contains too many
sheets to be folded and
stabled. See Help for
more details.
The image processor reports
that the BM job contains too
many sheets for the BM to fold
and staple. Maximum number of
output sheets that can
be folded and stapled is
15
03-569 Job contains too many
sheets to be folded. See
Help for more details.
The image processor reports
that the BM job contains too
many sheets for the BM to fold Maximum number of
output sheets that can
be folded is 15
03-570 Current job exceeds tray
capacity, you will be
prompted to empty the
tray
Job is too large for selected
output bin None
03-571 The installed staple car-
tridge can staple a maxi-
mum of 50 sheets. Please
confirm to close this win-
dow
50 sheet cartridge installed in
the HCSS Press confirm.
03-573 After clearing paper,
replace any discarded
tabs with identical tab
stock in the correct tray
Image processing reports that
a jam occurred Cleared when the IOT
has performed stray
sheet detection suc-
cessfully the status
clears
03-575 Main motor control fault.
Printing is unavailable. If
fault persists, call for
assistance. Touch Ignore
Error to use other services
Main motor not being con-
trolled. Fault 03-397 raised Perform 03-397 RAP
03-576 IOT cycled in without
printing
IOT cycled in without printing.
Fault 03-395 raised Perform 03-395, 396,
852, 853 RAP
03-579 - Speed in Image processing
NVM does not match speed in
DADH Perform 03-320, 03-322
to 03-324 RAP Perform
03-330, 03-462 RAP
03-580 - Speed in Image processing
NVM does not match speed in
IOT NVM. Fault 03-461 is
raised. Perform 03-330, 03-462
RAP
Table 3 03-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action