Xerox WC5545F, Service Manual

Page: 2202 / 2320

August 2007
6-310
WorkCentre 5687 Family
dC330
General Procedures & Information
09-074 Transfer / Detack Stall
Sensor
Transfer / detack cleaner head stall
sensor.
The stall sensor is a electrical
device within the motor control on
the IOT PWB. High = actuated, Low =
not actuated
Stack with transfer /
detack corotron cleaner
motor stall sensor,
motor forward and
motor reverse
09-310 Low Toner Sensor Low toner sensor (Q09-310) High = toner in sump,
low = toner depleted
09-350 Waste Toner Full Sen-
sor
Waste toner full sensor(Q09-350)
detects when waste toner reaches
a certain level in the container. High = container full,
low = container not full
09-360 Toner Conc. Sensor Toner concentration sensor (Q09-
360) Displays toner concen-
tration level in %
09-365 Humidity Sensor Relative humidity sensor (Q09-365) Displays RH%
09-370 Dev. Temp. Sensor Developer temperature sensor
(Q09-370) Displays temperature in
degrees C
09-375 Ambient Temp. Sensor Ambient temperature sensor (Q09-
375)
Displays temperature in
degrees C
09-380 Waste Toner Door Sw Waste toner door switch (S09-380)
detects if the waste bottle is miss-
ing or the door is open during run High = bottle present/
door closed, low = bottle
missing/door open
Table 7 Input codes 10
Code Displayed Name Description General
10-100 Fuser Exit Switch Fuser exit switch (S10-100),
detects when paper exits the fuser High = paper present,
low = no paper
10-105 Invert Sensor Inverter sensor (Q10-105), detects
when paper enters the inverter High = paper present,
low = no paper
10-120 IOT Exit Sensor IOT exit sensor (Q10-120), detects
when paper exits the IOT High = paper present,
low = no paper
10-300 Fuser Temp Sensor A Displays current thermistor values.
Converts input resistance of ther-
mistors and shows A-D conversion. 0-255 degrees C.
10-310 Fuser Temp Sensor B Displays current thermistor values.
Converts input resistance of ther-
mistors and shows A-D conversion. 0-255 degrees C.
10-315 Fuser Temp Fault Snr Detects fault in fuser thermistor. High = fault low = good
Table 8 Input codes 11
Code Displayed Name Description General
11-035 Bin 1 Empty Sensor HCSS BM bin 1 empty sensor
(Q11-035) High = bin empty, low =
bin not empty
Table 6 Input codes 09
Code Displayed Name Description General
11-044 Punch Unit Home
Sensor HVF punch unit home sensor (Q11-
044) High = home, low = unit
not home
11-100 Entry Sensor LCSS, HVF and HCSS BM entry
sensor (Q11-100) High = paper present,
low = no paper
11-110 Punch Sensor LCSS, HVF and HCSS BM punch
position sensor (Q11-110) High = paper present,
low = no paper
11-112 Chad Bin Set Sensor HVF chad bin set sensor (Q11-112)
detects when the chad bin installed High = chad bin
installed
11-120 Compiler Sensor HCSS BM Compiler sensor (Q11-
120) detects when paper enters the
compiler carriage High = paper present,
low = no paper
11-130 Top Exit Sensor LCSS, HVF and HCSS BM top exit
sensor (Q11-130) High = paper present,
low = no paper
11-140 2nd to Top Exit Snr LCSS, HVF and HCSS BM 2nd to
top exit sensor (Q11-140) detects
paper exiting to the bin (bin 1) High = paper present
low = no paper
11-150 Inserter Sheet Size
Detector 1 HVF inserter sheet size detector 1
(Q11-150) detects the DOF (Direc-
tion Of Feed) sheet size in inserter
tray High = sheet size
detected
11-151 Inserter Sheet Size
Detector 2 HVF inserter sheet size detector 2
(Q11-151) detects the DOF (Direc-
tion Of Feed) sheet size in inserter
tray High = sheet size
detected
11-152 Inserter STS Sheet
Size Detector HVF inserter STS (Side To Side)
sheet size detector (Q11-152)
detects STS (Side To Side) sheet
size in inserter tray High = sheet size
detected
11-153 Inserter Unit Empty
Sensor HVF inserter unit empty sensor
(Q11-153) detects paper present
inserter tray High = paper present,
low = no paper
11-154 Inserter LE Sensor HVF inserter LE sensor (Q11-154)
detects the LE of the paper High = LE detected, low
= LE not detected
11-155 Inserter TE Sensor HVF inserter TE sensor (Q11-155)
detects the TE of the paper High = TE detected, low
= TE not detected
11-156 Inserter Bottom Plate
Sensor HVF inserter bottom plate sensor
(Q11-156) detects the bottom plate
in home position High = home position,
low = not home
11-157 Buffer Position Sen-
sor HVF Buffer position sensor (Q11-
157) detects paper High = paper present,
low = no paper
11-158 HVF Booklet Exit
Sensor HVF booklet exit sensor (Q11-158)
detects paper exiting the finisher to
enter into booklet maker High = paper present,
low = no paper
11-159 Nip Home Sensor HVF nip home sensor (Q11-159)
detects the position of the buffer
movement tray in descending High = Nip home
Table 8 Input codes 11
Code Displayed Name Description General