Xerox WC5545F, Service Manual

Page: 962 / 2320

August 2007
2-770
WorkCentre 5687 Family
OF4b
Status Indicator RAPs
Incomplete Network Inter-
face window 16-597 The network controller TIFF
interpreter failed Reset network con-
troller
Incomplete system infor-
mation. Please contact the
Machine Administrator 16-585 The network controller counters
remote configuration synchroni-
zation process has stopped Reset network con-
troller
Incomplete system infor-
mation. Please notify
machine administrator 16-578 The network controller fault ser-
vice process has stopped (fault
logging will be disabled) Reset network con-
troller
Incomplete system infor-
mation. Please notify
machine administrator 16-580 The network controller remote
configuration process has
stopped Reset network con-
troller
Incomplete system infor-
mation. Please notify
machine administrator 16-583 The network controller counters
utility process has stopped Reset network con-
troller
Incomplete system infor-
mation. Please notify
machine administrator 16-586 The network controller counters
SNMP agent process has
stopped Reset network con-
troller
Installation procedure is not
complete. Please com-
plete installation, then
switch the machine off then
on again 02-540 System Manager install phase
not set to IpinstallComplete or
DC Platform Manager install
phase not set to IpinstallCom-
plete Complete install pro-
cedure
Internal address book
unavailable. Please notify
machine administrator 16-538 Could not communicate with
the LDAP server Verify LDAP server
setup at web UI, verify
server is online, check
network connectivity
Internal power supply fail-
ure. Printing is unavailable.
If fault persists, call for
assistance. Touch Ignore
Error to use other services 09-560 HVPS failure. 09-060 fault Perform 09-060 RAP.
IOT cycled in without print-
ing 03-576 IOT cycled in without printing.
Fault 03-395 raised Perform 03-395, 396,
852, 853 RAP
IP interface error. Please
notify machine administra-
tor 16-598 Network controller - TCP / IP
address is already in use on the
network Contact SA. Another
IP address needs to
be used
Job contains too many
sheets to be folded and sta-
bled. See Help for more
details. 03-568 When the BM job contains too
many sheets for the BM to fold
and staple. Maximum number of
output sheets that can
be folded and stapled
is 15
Job contains too many
sheets to be folded. See
Help for more details. 03-569 When the BM job contains too
many sheets for the BM to fold Maximum number of
output sheets that can
be folded is 15
Table 2 Status messages G to N
UI Message
Status
Code
Reason for Message Reference / Action
Job in progress. Manual
stapling will be available
when the current output job
set completes 11-538 Offline stapling requested while
a print job is in progress for out-
put to any bin other than bin 0
(top bin) Cleared when current
job completed
Job in progress. Please
wait until Manual Stapling
job is complete 11-539 Offline stapling is ‘Ready’ and a
user requests a print job for
output to the stacker, mailboxes
or BM Cleared when offline
stapling mode is can-
celled
Job status information not
available. Please notify
machine administrator 16-574 The network controller protocol
module process has stopped Reset network con-
troller
Job status information not
available. Please notify
machine administrator 16-579 The network controller com-
pleted job log service and print
SPI processes have stopped Reset network con-
troller
Job was deleted because a
document was larger than
expected. Discard output.
Try flattening the docu-
ment and either re-scan it
through the document
feeder or scan it from the
document glass 05-507 Fault 05-331 is raised. Perform 05-330, 05-
331 RAP
Local interface problem
detected. Please switch the
machine off and on again 02-531 Faults declared. UI running in
degraded mode Perform 02-309, 02-
390, 02-391, 02-704,
02-706 RAP
Local interface problem
detected. Please switch the
machine off and on again 02-532 Fault declared. UI software
error. Fault 02-320 called dur-
ing power on sequence Perform 02-320, 02-
380 RAP
Machine cloning is in pro-
cess. This shall take a few
minutes to complete 16-506 Status raised while Network
controller connectivity settings
are being cloned Cleared automatically
when cloning is com-
pleted
Main motor control fault.
Printing is unavailable. If
fault persists, call for assis-
tance. Touch Ignore Error
to use other services 03-575 Main motor not being con-
trolled. Fault 03-397 raised Perform 03-397 RAP
Max. number of fax jobs in
the system has been
reached. Contact your sys-
tem administrator. 20-565 All jobs IDs allocated cannot
create any more When fax job IDs
become available
Media required for held job
is not available 22-513 Queued Job being held due to
lack of for resources Add paper to the tray
being used to clear
queued job
Table 2 Status messages G to N
UI Message
Status
Code
Reason for Message Reference / Action