Xerox WC5545F, Service Manual

Page: 939 / 2320

August 2007
2-747
WorkCentre 5687 Family
OF4a
Status Indicator RAPs
08-557 Open left hand door Paper over the registration
sensor when feeding from the
bypass tray Jam clearance. Per-
form 08-155A, 08-
156A RAP
08-558 Clear jam in Tray 5 Sheet over the feed sensor Jam clearance. Per-
form 08-115B, 08-
117B
08-561 Open tray 1 Sheet near Tray 1 feed sensor.
08-106 Jam clearance. Per-
form 08-106 RAP
08-562 Open tray 2 Sheet near Tray 2 feed sensor Jam clearance. Per-
form 08-106 RAP
08-563 Open tray 3 Sheet near Tray 3 feed sensor Jam clearance.
Perform08-107 RAP
08-564 Open tray 4 Sheet near Tray 4 feed sensor Jam clearance. Per-
form 08-108 RAP
08-565 Open left hand door Sheet near registration sensor Jam clearance Per-
form 08-150, 08-151
RAP
08-566 Open front door Sheet near duplex sensor Jam clearance. Per-
form 08-160, 08-161
RAP
08-567 Open left hand door Paper over the registration
sensor when feeding from the
bypass tray Jam clearance. Per-
form 08-155, 08-156
RAP
08-568 Clear jam in Tray 5 Paper did not reach the tray 5
feed sensor in time Clear jam or perform
08-115B, 08-117B
RAP
08-570 Post jam clearance initial
is at ion in progress The IOT and finisher device
are performing the post jam
clearance initialization pro-
cess to check for stray sheets Status clears on com-
pletion of initialization
process
08-580 Paper jam not fully cleared A stray sheet has been
detected in either the IOT or
finisher device during the post
jam clearance initialization rou-
tine. 08-190
Jam clearance. Per-
form 08-190 RAP
08-590 An unexpected time-out
was detected for a sheet in
the paper path. This may
be due to a different paper
in the trays than the
machine expects. Please
check and confirm the con-
tents of the paper trays Unexpected event or time-out
for sheet. 08-171, 08-181, 08-
182 Perform 08-171 RAP,
08-181 RAP, 08-182
RAP
Table 8 08-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
Table 9 09-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
09-540 Xerographic Module
cleaning in progress.
Please wait The Scorotron cleaning is in
progress Refer to 09-341, 09-
342 Scorotron Clean-
ing Failure RAP
09-541 Xerographic Module
Cleaning Failure. Copy
and Printing unavailable.
Touch Power Off to switch
machine off or touch
Ignore Error to use other
services Scorotron cleaning failure Refer to 09-341, 09-
342 Scorotron Clean-
ing Failure RAP
09-543 Xerographic Module Main-
tenance Please follow the
instructions below Charge scorotron manual
cleaning required Refer to IQ1 Image
Quality Entry RAP
09-545 - This status is raised when the
toner gas gauge is disabled No action required.
The toner gas gauge
can be enabled, if
required
09-546 - Replenisher sump refilling Perform 09-360, 09-
361, 09-362, 09-363
RAP
09-550 Printing is unavailable Photoreceptor erase lamp has
failed. 09-350 fault Perform 09-350 RAP
09-560 Internal power supply fail-
ure. Printing is unavail-
able. If fault persists, call
for assistance. Touch
Ignore Error to use other
services HVPS failure. 09-060 fault Perform 09-060 RAP.
09-570 The Xerographic module is
not compatible with this
machine. Please refer to
the User Guide Xerographic module CRUM
authorization failure. 09-399.
The status clears when the
associated has been cleared Perform 09-399 RAP.
09-584 Re-order, but do not
replace xerographic mod-
ule Xerographic module near end
of life Re-order a new xero-
graphic module, (32-
38 ppm) PL 9.22 Item
2, (45-87 ppm) PL 9.20
Item 2.
09-585 Replace Xerographic Mod-
ule Xerographic module end of life Install a new xero-
graphic module (32-38
ppm) PL 9.22 Item 2,
(45-87 ppm) PL 9.20
Item 2.