Xerox WC5545F, Service Manual

Page: 2201 / 2320

August 2007
6-309
WorkCentre 5687 Family
dC330
General Procedures & Information
07-337 T2 stack height Sensor Tray 2 stack height sensor (Q07-
337)
High = top of stack
sensed, low = top of
stack not sensed
07-338 T3 Level Encoder Detects tray 3 paper level encoder
status (Q07-338) High = top of stack
sensed, low = top of
stack not sensed
07-339 T4 Level Encoder Detects tray 4 paper level encoder
status (Q07-339) High = top of stack
sensed, low = top of
stack not sensed
07-341 T1 paper low switch Detects if the stack height of tray 1
is more than 25% (S07-341) High = more than 25%
full, Low = less than
25% full
07-342 T2 paper low switch Detects if the stack height of tray 2
is more than 25% (S07-342) High = more than 25%
full, Low = less than
25% full
07-350 Bypass Width Sensor Bypass width sensor (Q07-335) Display indicates width
setting 100 to 300 mm
(3.93 to 11.81 inch)
07-372 T5 Docking Switch Detects that tray 5 is in the docked
position (S07-372) High = Tray 5 docked
07-383 T3 Stack Height Sen-
sor
Tray 3 stack height sensor (Q07-
383) High = top of stack
sensed, low = top of
stack not sensed
07-384 T4 Stack Height Sen-
sor
Tray 4 stack height sensor (Q07-
384) High = top of stack
sensed, low = top of
stack not sensed
07-385 T3 hall Sensor Tray 3 hall sensor (Q07-385)
The sensor is located on a small
PCB and detects magnetic field
changes as the feed motor rotates. High = Made. Only run
when T3 door is open
07-386 T4 hall Sensor Tray 4 hall sensor (Q07-386)
The sensor is located on a small
PCB and detects magnetic field
changes as the feed motor rotates. High = Made. Only run
when T4 door is open
07-387 HCF 24V Monitor Indicates the state of 24V input
monitor High = 24V present
07-401 T5 Tray Empty Sensor Detects the presents of paper on
tray 5 (Q07-401)
High = paper present,
Low = no paper
07-402 T5 Stack Height Sen-
sor
Tray 5 stack height sensor (Q07-
402) High = top of stack
sensed, Low = top of
stack not sensed
07-403 T5 24V Monitor Indicates the state of 24V input
monitor High = 24V present
07-405 T5 Stack Down Sensor Tray 5 stack down sensor (Q07-
405), detects when the tray is in the
fully lowered position
High = tray is fully down
Table 4 Input codes 07
Code Displayed Name Description General
07-406 T5 El Motor Encoder
Sensor
Encoder sensor (Q07-406), detects
state of motor encoder sensor bit High = detected, low =
not detected
Table 5 Input codes 08
Code Displayed Name Description General
08-100 Wait Sensor Wait sensor (Q08-100), detects
when lead edge of paper at wait
point. High = paper present,
low = no paper
08-101 T1 Feed Sensor Detects when lead edge of paper is
at tray 1 feed sensor, (Q08-101) High = paper present,
low = no paper
08-102 T2 Feed Sensor Detects when lead edge of paper is
at tray 2 feed sensor, (Q08-102) High = paper present,
low= no paper
08-103 T3 Feed Sensor Detects when lead edge of paper is
at tray 3 feed sensor, (Q08-103) High = paper present,
low = no paper
08-104 T4 Feed Sensor Detects when lead edge of paper is
at tray 4 feed sensor, (Q08-104) High = paper present,
low = no paper
08-105 T5 Feed Sensor Detects when the lead edge of the
paper is at tray 5 feed sensor (Q08-
105) High = paper present,
Low = no paper
08-110 T5 wait Point Sensor Wait sensor (Q08-110), detects
when lead edge of paper at wait
point. (same sensor as for 08-100) High = paper present,
low = no paper
08-111 T5 Release Sheet Hot-
line
Displays the state of the release
sheet hotline High = hotline active,
low = not active
08-150 Registration Sensor Detects when paper is at the regis-
tration sensor (Q08-150) High = paper present,
low = no paper
08-160 Duplex Sensor Detects when paper is at the duplex
sensor (Q08-160) High = paper present,
low = no paper
Table 6 Input codes 09
Code Displayed Name Description General
09-060 HVPS Fault Detects a fault in the HVPS High = fault, low = good
09-070 Scorotron cleaner
home sensor
Detects the scorotron cleaning
head in the home position High = head not home,
low = head in home
position
09-073 Transfer / Detack
Home Sensor
Transfer / detack cleaner head
home sensor. High = head not home,
Low = head in home
position
Stack with transfer /
detack corotron cleaner
motor stall sensor,
motor forward and
motor reverse
Table 4 Input codes 07
Code Displayed Name Description General