Xerox WC5545F, Service Manual

Page: 1968 / 2320

August 2007
6-76
WorkCentre 5687 Family
dC131a
General Procedures & Information
08-590 Fsr Tol run B(2) Temperature tolerance
either side of run target on
thermistor B. 0 to 0 deg C 32/38/45=0
55/65/75/
87=40
08-591 Fsr Max 1(2) Temperature at which the
machine calls an over tem-
perature fault. 0 to 0 deg C 230
08-592 Fsr Max 2(2) Temperature at which the
machine shutdowns the
fuser. 0 to 0 deg C 245
08-593 Fsr Tol Standby (2) Temperature tolerance
either side of standby target
temperature.
0 to 0 deg C 32/38=26
45/55=20
65/75/87=15
08-594 Fsr Apply Power
Time (2) Fuser apply power time. 100 to
20000ms 200
08-596 T Range Cool-
ing(2) Temperature offset above
Tsave at which control and
fault detection is enabled. 0 to 0 deg C 10
08-597 TE Reg Clutch Off
Transp Time to ensure the sheet is
clear of the registration nips
before switching clutch off. 100 to 1200ms 32/38=860
45/55=610
65/75/87=700
08-600 VT Fan On In
Duplex Enable/disable vacuum
transport fan continuously
on during duplex printing. 0=Disabled
1=Enabled 0
08-601 Inv Mt Fwd To Inv
Mt Rev M7 Restart sheet into duplex
(mode 7), sheets >185mm
size 2. 0 to 2500ms 32/38=1353
45/55=927
65/75=985
87=697
08-602 Inv Mt Fwd To Inv
Mt Rev S1 Restart sheet into duplex
(mode 1), sheets <185mm
size 1. 0 to 2500ms 32/38=478
45/55=927
65/75=808
87=492
08-603 LE Dup Snr To
Clutch On M2 Duplex buckle timer mode
1. 0 to 700ms 32/38=496
45/55=343
65/75=425
87=431
08-604 LE Dup Snr To
Clutch On M3 Duplex buckle timer mode
1. 0 to 700ms 32/38=496
45/55=343
65/75=425
87=431
08-605 LE Dup Snr To
Clutch On M4 Duplex buckle timer mode
1. 0 to 700ms 32/38=496
45/55=343
65/75=425
87=431
Table 7 NVM chain 8
Location NVM Name NVM Description Value Default
08-606 LE Dup Snr To
Clutch On M5 Duplex buckle timer mode
1. 0 to 700ms 32/38=496
45/55=343
65/75=244
87=256
08-607 LE Dup Snr To
Clutch On M6 Duplex buckle timer mode
1. 0 to 700ms 32/38=496
45/55=343
65/75=244
87=256
08-608 LE Dup Snr To
Clutch On M7 Duplex buckle timer mode
1. 0 to 700ms 32/38=496
45/55=343
65/75=244
87=256
08-609 LE Dup Snr To Clt
On Nom M2 LE at duplex sensor to
clutch on. 0 to 1000ms 32/38=496
45/55=343
65/75=425
87=431
08-610 LE Dup Snr To Clt
On Nom M3 LE at duplex sensor to
clutch on. 0 to 1000ms 32/38=496
45/55=343
65/75=425
87=431
08-611 LE Dup Snr To Clt
On Nom M4 LE at duplex sensor to
clutch on. 0 to 1000ms 32/38=496
45/55=343
65/75=425
87=431
08-612 LE Dup Snr To Clt
On Nom M5 LE at duplex sensor to
clutch on. 0 to 1000ms 32/38=496
45/55=343
65/75=244
87=256
08-613 LE Dup Snr To Clt
On Nom M6 LE at duplex sensor to
clutch on 0 to 1000ms 32/38=496
45/55=343
65/75=244
87=256
08-614 LE Dup Snr To Clt
On Nom M7 LE at duplex sensor to
clutch on 0 to 1000ms 32/38=496
45/55=343
65/75=244
87=256
08-900 Enable Diag.
Access Use to enable or disable
restricted diagnostics
access. Use with 03-900 0 = disabled
1 = enable 0
Table 8 NVM chain 9
Location NVM Name NVM Description Value Default
09-001 TC Lockout Low CSF NVM lockout for TC
process control failure
(low). 0=clear 1=lock-
out 0
Table 7 NVM chain 8
Location NVM Name NVM Description Value Default