Xerox WC5545F, Service Manual

Page: 940 / 2320

August 2007
2-748
WorkCentre 5687 Family
OF4a
Status Indicator RAPs
09-586 - IOT detects an xerographic
module failure Switch the machine off
and on, GP 14. Install
a new xerographic
module
09-587 - The system setting does not
match the xerographic module
type Install correct xero-
graphic module or
modify setting
09-588 - The system setting does not
match the xerographic module
market region ID setting Install correct xero-
graphic module or
modify setting
09-589 - The system setting does not
match the xerographic module
speed setting Install correct xero-
graphic module or
modify speed setting
09-590 Ozone filter near end of
life, ensure you have a
replacement filter Ozone life counter near end of
life Order a new ozone fil-
ter, PL 9.25 Item 3.
09-591 Replace Ozone Filter Ozone life counter reaches end
of life Install new ozone fil-
ter, PL 9.25 Item 3
09-592 Toner cartridge empty Toner level sensor registers
developer sump not full Install new toner car-
tridge, PL 9.15 Item 4,
PL 9.17 Item 4.
09-593 - Accumulated toner dispense
time value greater than 27 s
attained, or cycle out event
occurs (Toner cartridge empty).
09-390 Install new toner car-
tridge. Perform 09-
310, 09-390 RAP
09-594 Replace waste toner bottle Waste toner shutdown counter
value attained OR if waste
toner shutdown counter value
greater than 50% and cycle out
event occurs
Install new waste toner
bottle, PL 9.10 Item 1.
09-595 Waste toner bottle nearly
full, ensure you have a
replacement bottle Waste toner full sensor regis-
ters full for greater than 100
pages. Perform 09B RAP
09-596 Ensure waste toner bottle
is fitted and waste toner
door is closed IOT detects waste bottle door
open. Ensure waste bottle fit-
ted and door closed.
Perform 09-380 RAP
09-597 Toner control failure Toner concentration process
control failure. Perform 09-360, 09-
361, 09-362, 09-363
RAP
09-598 Toner control sensor fail-
ure Toner control sensor failure. Perform 09-360, 09-
361, 09-362, 09-363
RAP
Table 9 09-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
09-599 Toner cartridge nearly
empty. Ensure you have a
replacement cartridge When less than X days pre-
dicted until toner cartridge end
of life Order a new toner car-
tridge, PL 9.15 Item 4,
PL 9.17 Item 4.
Or cleared when 02-
560 status code is
raised.
Table 10 10-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
10-505 The fuser is warming up.
Printing may be delayed Fuser not at temperature Perform 10-322, 10-
324, 10-325, 10-330,
10-370 RAP
10-507 Open front door Sheet is near the IOT exit sen-
sor in the non-invert path Jam clearance or per-
form 10-120, 10-121,
10-126
10-508 Open front door Sheet is near the IOT exit sen-
sor in the left hand side of the
invert path Jam clearance or per-
form 10-120, 10-121,
10-126
10-509 Open front door Sheet is near the IOT exit sen-
sor in the right hand side of the
invert path Jam clearance or per-
form 10-120, 10-121,
10-126
10-510 Clear jam in IOT zone 4 Post fuser sensor detects
paper in post fuser area on
power-on or in standby Perform 10-107, 10-
108, 10-109, 10-110
RAP
10-511 Open front door Sheet near post fuser sensor Jam clearance or per-
form 10-107, 10-108,
10-109, 10-110 RAP
10-512 Open front door IOT exit sensor paper in IOT
exit area at power -on or start
print Jam clearance. Per-
form 10-120, 10-121,
10-126 RAP
10-513 Open front door Sheet near IOT exit sensor Jam clearance. Per-
form 10-120, 10-121,
10-126 RAP
10-520 Replace fuser module Fuser counter reaches 300 k
prints Install new fuser mod-
ule, PL 10.10 Item 1,
PL 10.8 Item 1.
10-521 Re-order but do not
replace fuser module Fuser counter reaches 290 k
prints Order a new fuser
module, PL 10.10 Item
1, PL 10.8 Item 1.
10-523 Replace fuser module IOT detects fuser failure Install new fuser mod-
ule, PL 10.10 Item 1,
PL 10.8 Item 1.
Table 9 09-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action