Xerox WC5545F, Service Manual

Page: 1959 / 2320

August 2007
6-67
WorkCentre 5687 Family
dC131a
General Procedures & Information
03-012 Prod config
(speed) Defines product configura-
tion (processing speed).
08-001 must be set to the
same speed. 32=32ppm
35=35ppm
38=38ppm
45=45ppm
55=55ppm
65=65ppm
75=75ppm
85=87ppm 33
03-013 Doc Handler
Config Defines if the DADH or
document cover is present,
Auto select. 0=DADH 1=Doc. cover 1
03-014 Inverter Switch Determines if sheets deliv-
ered face up (non inverted)
or face down (inverted). 0=face up 1=face down 1
03-015 SIP Machine
Model Machine Configuration
Setting.
Password protected. Range 0 to 6 0
03-016 SIP Machine
Type Machine Type Setting.
Password protected. 0=Unknown
1=Universal 1
03-017 SIP CommsPort-
Accs Image Processing serial
communication port
access - either disabled or
enabled. 0=Disabled
1=Enabled 1
03-018 DC Install Phase Define platform current
phase.
0=Incomplete
1=Incomplete
2=Incomplete
3=Install Wizard
4=Incomplete 0
03-019 SIP Serial Port
Mode SIP serial port mode. 0=Debug mode
1=Modem Mode 0
03-020 ADV Threshold Determines the threshold
for when the daily count is
added to the Average daily
volume. 1 to 100 1
03-400 IQA Highlight
Ref Image quality adjustment
highlight reference. 0 to 255 156
03-401 IQA Shadow Ref Image quality adjustment
shadow reference.
0 to 255 15
03-402 IQA K1 Constant Image quality adjustment.
K1 constant.
0 to 3000 32/
38=2500
45/55/65/
75/
87=500
Table 3 NVM chain 3
Location NVM Name NVM Description Value Default
03-403 IQA K2 Constant Image quality adjustment.
K2 constant.
0 to 6000 32/
38=1500
45/55/65/
75/
87=5500
03-404 IQA K3 Constant Image quality adjustment.
K3 constant.
0 to 200 0
03-405 IQA K4 Constant Image quality adjustment.
K4 constant.
0 to 5000 32/38=0
45/55/65/
75/
87=3000
03-406 IQA K5 Constant Image quality adjustment.
K5 constant.
0 to 500000 32/
38=1350
00
45/55
=8200
65/75/
87=9100
0
03-407 IQA K6 Constant Image quality adjustment.
K6 constant.
0 to 3000 0
03-408 IQA White Max
SD Image quality adjustment
maximum standard devia-
tion limit for white back-
ground. 0 to 25 15
03-409 IQA Max Av
Grey Lvl Image quality adjustment
maximum average grey
level. 0 to 255 0
03-410 IQA Min Av Grey
Lvl Image quality adjustment
minimum average grey
level. 0 to 255 195
03-420 AutoModeTRC-
Slope TRC Slope in auto mode
(Toner reproduction curve) 10 to 80 20
03-421 AutoModeTR-
COffset TRC offset in auto mode 0 to 500 400
03-422 SpecialMode-
TRCSlope TRC slope in special mode 10 to 80 20
03-423 SpecialModeTR-
COffset TRC offset in special mode 0 to 500 400
03-424 PhotoModeTRC-
Slope TRC slope in photo mode 10 to 80 20
03-425 PhotoModeTR-
COffset TRC offset in photo mode 0 to 500 400
03-900 Restrict Diag.
Pin Retains the restricted diag-
nostics pin. Use with 08-
900 1000 to 999999999 1962
Table 3 NVM chain 3
Location NVM Name NVM Description Value Default