Xerox WC5545F, Service Manual

Page: 967 / 2320

August 2007
2-775
WorkCentre 5687 Family
OF4b
Status Indicator RAPs
Output Tray full. Please
empty the Output Tray. 11-572 Fifty additional prints have
been sent to bin 1 since 90%
full sensor made Perform 11-030-110,
11-334-110, 11-335-
110, 11-336-110 RAP
for LCSS, 11-030-130,
11-336-130 RAP for
HCSS, 11-030-170,
11-336-170 RAP for
HCSS BM
Output Tray full. Please
empty the Output Tray. 11-574 Finisher bin 2 full Perform 11-430-130
RAP for HCSS, 11E-
170 RAP for HCSS
BM
Output tray nearly full 10-516 Printer bin 0 90% full sensor
made Unload the tray
Output tray nearly full 11-571 Bin 0 90% full sensor made Perform 11-130-110,
11-132-110 RAP for
LCSS, 11-130-170,
11-132-170 RAP for
HCSS BM
Output tray nearly full 11-573 Bin 1 90% full sensor made Perform 11-030-110,
11-334-110, 11-335-
110, 11-336-110 RAP
for LCSS,11-430-130
RAP for HCSS, 11-
430-170 RAP for
HCSS BM
Output tray nearly full 11-575 Bin 2 90% full sensor made Perform 11-430-130
RAP for HCSS, 11E-
170 RAP for HCSS
BM
Output Trays out of service.
Remove all paper from
Output Trays. 11-598 Output trays have reached their
capacity. Refer to 11-430-130
RAP for HCSS, 11-
430-170 RAP for
HCSS BM
Ozone filter near end of life,
ensure you have a replace-
ment filter 09-590 Ozone life counter near end of
life Order a new ozone fil-
ter, PL 9.25 Item 3.
Page-over BB compiler
Sensor 11-530 Sheet over the booklet maker
entry sensor Clear the area or per-
form 11-183-171, 11-
184-171 RAP
Page over Buffer Position
Sensor 11-526 Sheet over the buffer position
sensor Clear the area or per-
form 11-198-171, 11-
199-171 RAP
Page over exit HVF into
Booklet Maker Sensor 11-527 Sheet over the HVF exit into
BM sensor Clear the area or per-
form 11-198-171, 11-
199-171 RAP
Table 3 Status messages O to R
UI Message
Status
Code
Reason for Message Reference / Action
Page-over PPI Pickup Sen-
sor 11-524 Sheet over the inserter pickup
sensor Clear the area or per-
form 11-479-171 RAP
Page-over PPI Tab
Standby Sensor 11-525 Sheet over the inserter tab
standby sensor Clear the area or per-
form 11-191-171, 11-
193-171, 11-194-171,
11-196-171 RAP
Page over Stacker Bin Exit
Sensor 11-528 Sheet over the stacker bin exit
sensor Clear the area or per-
form 11-140-171, 11-
142-171
Page over Tri-fold Entry
Sensor 11-529 Sheet over the tri-folder entry
sensor Clear the area or per-
form 11-183-171, 11-
184-171 RAP
Paper jam not fully cleared 08-580 A stray sheet has been
detected in either the IOT or fin-
isher device during the post
jam clearance initialization rou-
tine. 08-190 Jam clearance. Per-
form 08-190 RAP
Paper size mismatch.
Check paper in Tray 1.
Some image loss may
occur 07-571 First sheet fed after a tray 1 sta-
tus change does not match the
confirmed stock Check the paper in
tray 1. Perform 07D
RAP
Paper size mismatch.
Check paper in Tray 2.
Some image loss may
occur 07-572 First sheet fed after a tray 2 sta-
tus change does not match the
confirmed stock Check the paper in
tray 2. Perform 07D
RAP
Paper size mismatch.
Check paper in Tray 3.
Some image loss may
occur 07-573 First sheet fed after a tray 3 sta-
tus change does not match the
confirmed stock Check the paper in
tray 3. Check that the
tray is set to correct
paper size, ADJ 7.1
Paper size mismatch.
Check paper in Tray 4.
Some image loss may
occur 07-574 First sheet fed after a tray 4 sta-
tus change does not match the
confirmed stock Check the paper in
tray 4. Check that the
tray is set to correct
paper size, ADJ 7.1
Paper size mismatch.
Check paper in Bypass
tray. Some image loss may
occur 07-575 First sheet fed after a bypass
tray status change does not
match the confirmed stock Check the paper in
bypass tray and the
side guide is set cor-
rectly
Paper Trays are unavail-
able. Call for assistance 03-549 IOT microprocessor: comm
error. Fault 03-350 is raised. Perform 03-350, 03-
351, 03-354 RAP
Pause To Unload Time-out
Warning 11-941 Machine is paused for unload-
ing. Need to press button on
pop up screen Follow the instruc-
tions. If necessary,
perform 11H-171
Pause To Unload Time-out
Warning 11-942 Timer expiry. Wait for machine
to pause, then press button on
pop up screen Follow the instruc-
tions. If necessary,
perform 11H-171
Table 3 Status messages O to R
UI Message
Status
Code
Reason for Message Reference / Action