Woodward HighPROtec MCDLV4, Manual

Page: 802 / 1275

Protective Elements
Parameter Description Setting range Default Menu path
Shots Maximum number of permitted reclosure
attempts.
1 - 6 1 [Protection
Para
/<1..4>
/AR
/General
Settings]
Initiate Mode Initiate Mode Alarm,
TripCmd
Alarm [Protection
Para
/<1..4>
/AR
/General
Settings]
t-start Start timer - While the start timer runs
down, an AR attempt can be started. Only if
the trip command is given within the start
time/duration an AR attempt could be
started. The location and the resistance of
the fault have a big influence on the tripping
time. The start time has an impact on
whether an AR attempt should be started
when the fault is far away or high
resistance.
Only available if: Initiate Mode = TripCmd
0.01 - 9999.00s 1s [Protection
Para
/<1..4>
/AR
/General
Settings]
t-DP1 Dead time between trip and reclosure
attempt for phase faults.
Only available if: Shots = 1-6
0.01 - 9999.00s 1s [Protection
Para
/<1..4>
/AR
/Shot Manager
/Shot Ctrl1]
t-DP2 Dead time between trip and reclosure
attempt for phase faults.
Only available if: Shots = 2-6
0.01 - 9999.00s 1s [Protection
Para
/<1..4>
/AR
/Shot Manager
/Shot Ctrl2]
t-DP3 Dead time between trip and reclosure
attempt for phase faults.
Only available if: Shots = 3-6
0.01 - 9999.00s 1s [Protection
Para
/<1..4>
/AR
/Shot Manager
/Shot Ctrl3]
802 MCDLV4 DOK-HB-MCDLV4-2E