Woodward HighPROtec MCDLV4, Manual

Page: 561 / 1275

Switchgear/Breaker – Manager
Parameter Description Setting range Default Menu path
Off Cmd70 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[3]
/Trip Manager]
Off Cmd71 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true. 1..n, Trip Cmds -.- [Control
/SG
/SG[3]
/Trip Manager]
Off Cmd72 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[3]
/Trip Manager]
Off Cmd73 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true. 1..n, Trip Cmds -.- [Control
/SG
/SG[3]
/Trip Manager]
Off Cmd74 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[3]
/Trip Manager]
Off Cmd75 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true. 1..n, Trip Cmds -.- [Control
/SG
/SG[3]
/Trip Manager]
Synchronism Synchronism 1..n, In-SyncList -.- [Control
/SG
/SG[3]
/Synchron
Switchg]
t-
MaxSyncSuperv
Synchron-Run timer: Max. time allowed for
synchronizing process after a close initiate.
Only used for GENERATOR2SYSTEM working
mode.
0 - 3000.00s 0.2s [Control
/SG
/SG[3]
/Synchron
Switchg]
ON incl Prot ON The ON Command includes the ON
Command issued by the Protection module.
inactive,
active
active [Control
/SG
/SG[3]
/General
Settings]
561 MCDLV4 DOK-HB-MCDLV4-2E