Woodward HighPROtec MCDLV4, Manual

Page: 97 / 1275

Input, Output and LED Settings
Assignment of Digital Inputs
There are two options available in order to determine where a Digital Input should be assigned to.
Option 1 – Assigning a Digital Input onto one or mutliple modules.
Adding an assignment:
Within menu [Device Parameter\Digital Inputs] Digital Inputs can be assigned onto one or multiple targets.
Call up the Digital Input (Arrow right on the DI). Click on the Softkey »Parameter Setting/Wrench« . Click on
»Add« and assign a target. Assign where required additional targets.
Deleting an assignment:
Select as described above a Digital Input that should be edited at the HMI.
Call up the assignments of the Digital Input (Arrow-right on the DI) and select the assignment that should be
removed/deleted (Please note, this has to marked with the cursor). The assignment can now be deleted at
the HMI by means of the Softkey »
Parameter setting« and selection of »remove«. Confirm the parameter
setting update.
Option 2 – Connecting a Module Input with a Digital Input
Call a module. Within this module assign a Digital Input onto a module input. Example: A protection module
should be blocked depending on the state of a Digital Input.. For this assign onto the blocking input within the
Global Parameters the Digital Input (e.g. Ex Blo 1).
97 MCDLV4 DOK-HB-MCDLV4-2E
Protection Module 2
Input
Device Para/digital input
Protection Module 1
Input
1 2
Option Option