Woodward HighPROtec MCDLV4, Manual, Page: 772 / 1275

Protective Elements
Switch Onto Fault Module Input States
Name Description Assignment via
ExBlo1-I Module input state: External blocking [Protection Para
/Global Prot Para
/SOTF]
ExBlo2-I Module input state: External blocking [Protection Para
/Global Prot Para
/SOTF]
Ex rev Interl-I Module input state: External reverse interlocking [Protection Para
/Global Prot Para
/SOTF]
Ext SOTF-I Module input state: External Switch Onto Fault
Alarm
[Protection Para
/Global Prot Para
/SOTF]
Signals of the Switch Onto Fault Module (Output States)
Signal Description
active Signal: active
ExBlo Signal: External Blocking
Ex rev Interl Signal: External reverse Interlocking
enabled Signal: Switch Onto Fault enabled. This Signal can be used to modify
Overcurrent Protection Settings.
AR Blo Signal: Blocked by AR
I< Signal: No Load Current.
772 MCDLV4 DOK-HB-MCDLV4-2E