Woodward HighPROtec MCDLV4, Manual, Page: 93 / 1275

Navigation - Operation
Navigation
Parameter
decrement/increment.
Scrolling up/down a menu
page
Moving to a digit
Change into the parameter
setting mode »wrench
symbol«
.
6
INFO Key
(Signals/Messa
ges)
Looking through the present
LED assignment. The direct
select key can be actuated at
any time.
If the INFO key is actuated
once, the
»
LEFT
LED
SIGNALS
«
are inserted, if the INFO key is
actuated again, the
»
RIGHT
LED
SIGNALS
«
are inserted. If the
INFO key is actuated again you
will leave the LED menu.
Here only the first assignments
of the LEDs will be shown. Every
three seconds the
»SOFTKEYs«
will be shown (flashing).
Displaying the multiple
Assignments
If the INFO-Button is pressed
only the first assignments of any
LED is shown. Every three
seconds the
»SOFTKEYs«
will
be shown (flashing).
If there is more than one signal
assigned to a LED (indicated by
three dots) you can check the
state of the multiple
assignments if you proceed as
follows.
In order to show all (multiple)
assignments select a LED by
means of the
»SOFTKEYs«
»up« and
»down«
Via the »Softkey« »right« call up
a
Submenu of this LED that
gives you detailed information
on the state of all signals
93 MCDLV4 DOK-HB-MCDLV4-2E