Woodward HighPROtec MCDLV4, Manual

Page: 937 / 1275

Protective Elements
Setting Group Parameters of the Reconnection Module
Parameter Description Setting range Default Menu path
Function Permanent activation or deactivation of
module/stage.
inactive,
active
inactive [Protection
Para
/<1..4>
/Intercon-Prot
/ReCon[1]
/General
Settings]
ExBlo Fc Activate (allow) or inactivate (disallow)
blocking of the module/stage. This
parameter is only effective if a signal is
assigned to the corresponding global
protection parameter. If the signal becomes
true, those modules/stages are blocked that
are parameterized "ExBlo Fc=active".
inactive,
active
inactive [Protection
Para
/<1..4>
/Intercon-Prot
/ReCon[1]
/General
Settings]
Meas Circuit
Superv
Activates the use of the measuring circuit
supervision. In this case the module will be
blocked if a measuring circuit supervision
module (e.g. LOP, VTS) signals a disturbed
measuring circuit (e.g. caused by a fuse
failure).
inactive,
active
inactive [Protection
Para
/<1..4>
/Intercon-Prot
/ReCon[1]
/General
Settings]
V Ext Release
PCC Fc
Activate the release signal of the Point of
Common Coupling. The line-to-line voltage
is greater than 95% of VN.
inactive,
active
inactive [Protection
Para
/<1..4>
/Intercon-Prot
/ReCon[1]
/General
Settings]
Reconnect.
Release Cond
This parameter ensures that the mains
voltage is recovered.
V Internal
Release,
V Ext Release
PCC,
Both
Both [Protection
Para
/<1..4>
/Intercon-Prot
/ReCon[1]
/Release Para]
PCC Fuse Fail
VT Fk Blocking if the fuse of a voltage transformer
has tripped at the PCC.
Only available if: Reconnect. Release Cond
= V Ext Release PCC Only available if:
Reconnect. Release Cond = V Ext Release
PCC or Both
inactive,
active
inactive [Protection
Para
/<1..4>
/Intercon-Prot
/ReCon[1]
/Release Para]
937 MCDLV4 DOK-HB-MCDLV4-2E