Woodward HighPROtec MCDLV4, Manual

Page: 562 / 1275

Switchgear/Breaker – Manager
Parameter Description Setting range Default Menu path
OFF incl
TripCmd
The OFF Command includes the OFF
Command issued by the Protection module.
inactive,
active
active [Control
/SG
/SG[3]
/General
Settings]
t-Move ON Time to move to the ON Position 0.01 - 100.00s 0.1s [Control
/SG
/SG[3]
/General
Settings]
t-Move OFF Time to move to the OFF Position 0.01 - 100.00s 0.1s [Control
/SG
/SG[3]
/General
Settings]
t-Dwell Dwell time 0 - 100.00s 0s [Control
/SG
/SG[3]
/General
Settings]
Monitored Circuit Breaker Input States
Name Description Assignment via
Aux ON-I Module Input State: Position indicator/check-back
signal of the CB (52a)
[Control
/SG
/SG[3]
/Pos Indicatrs Wirng]
Aux OFF-I Module input state: Position indicator/check-back
signal of the CB (52b) [Control
/SG
/SG[3]
/Pos Indicatrs Wirng]
Ready-I Module input state: CB ready [Control
/SG
/SG[3]
/Pos Indicatrs Wirng]
Sys-in-Sync-I State of the module input: This signals has to
become true within the synchronization time. If not,
switching is unsuccessful.
[Control
/SG
/SG[3]
/Synchron Switchg]
562 MCDLV4 DOK-HB-MCDLV4-2E