Woodward HighPROtec MCDLV4, Manual

Page: 1090 / 1275

Supervision
Successful test result part 1:
The output signals only become true if all the above mentioned conditions are fulfilled.
Test part 2:
Set the parameter » Measuring Circuit Supervision=active« within those protective elements that should be blocked
by the Loss of Potential supervision (
like undervoltage protection
.,voltage controlled overcurrent protection...).
Check those protective elements if they are blocked if the Loss of Potential supervision has generated a block
command.
Successful test result part 2:
All protective elements that should be blocked in case of Loss of Potential supervision are blocked if the conditions
(Procedure part 1) are fulfilled.
1090 MCDLV4 DOK-HB-MCDLV4-2E