Woodward HighPROtec MCDLV4, Manual, Page: 522 / 1275

Switchgear/Breaker – Manager
To select a switchgear press the softkey
»Select« as long as the desired
switchgear is selected. The current selection is displayed by the edges of a
rectangle. In this example the circuit breaker is selected. Switchgears that are
supervised only, cannot be selected.
The circuit breaker is opened, therefore it can be closed only.
After pushing the softkey »ON« a confirmation window appears.
When you are sure to proceed with the switching operation, press the softkey
»YES«.
The switching command will be given to the circuit breaker. The display shows the
intermediate position of the switchgear.
It will be shown on the display when the switchgear reaches the new end position.
Further possible switching operations (OPEN) will be displayed by softkeys.
522 MCDLV4 DOK-HB-MCDLV4-2E
x
QA1
QB1
QB2
x
QA1
QB1
QB2
x QA1
QB1
QB2
x
QA1
QB1 QB2