Woodward HighPROtec MCDLV4, Manual

Page: 697 / 1275

Protective Elements
Parameter Description Setting range Default Menu path
Ex rev Interl Fc Activate (allow) or inactivate (disallow)
blocking of the module/stage. This
parameter is only effective if a signal is
assigned to the corresponding global
protection parameter. If the signal becomes
true, those modules/stages are blocked that
are parameterized "Ex rev Interl Fc =
active".
inactive,
active
inactive [Protection
Para
/<1..4>
/I-Prot
/I[1]]
Blo TripCmd Permanent blocking of the Trip Command of
the module/stage. inactive,
active
inactive [Protection
Para
/<1..4>
/I-Prot
/I[1]]
ExBlo TripCmd
Fc Activate (allow) or inactivate (disallow)
blocking of the module/stage. This
parameter is only effective if a signal is
assigned to the corresponding global
protection parameter. If the signal becomes
true, those modules/stages are blocked that
are parameterized "ExBlo TripCmd
Fc=active".
inactive,
active
inactive [Protection
Para
/<1..4>
/I-Prot
/I[1]]
Measuring
method
Measuring method: fundamental or rms or
3rd harmonic (only generator protection
relays)
Fundamental,
True RMS,
I2
Fundamental [Protection
Para
/<1..4>
/I-Prot
/I[1]]
I> If the pickup value is exceeded, the
module/element starts to time out to trip.
Only available if: Characteristic = DEFT Or
Characteristic = INV Minimum of the setting
range If: VRestraint = active Minimum of the
setting range If: VRestraint = inactive
0.02 - 40.00In I[1]: 1.00In
I[2]: 1.00In
I[3]: 1.00In
I[4]: 1.00In
I[5]: 1.00In
I[6]: 1.50In
[Protection
Para
/<1..4>
/I-Prot
/I[1]]
697 MCDLV4 DOK-HB-MCDLV4-2E