Woodward HighPROtec MCDLV4, Manual, Page: 830 / 1275

Protective Elements
Setting Group Parameters of the Voltage Protection Module
Parameter Description Setting range Default Menu path
Function Permanent activation or deactivation of
module/stage. inactive,
active
V[1]: active
V[2]: inactive
V[3]: inactive
V[4]: inactive
V[5]: inactive
V[6]: inactive
[Protection
Para
/<1..4>
/V-Prot
/V[1]]
ExBlo Fc Activate (allow) or inactivate (disallow)
blocking of the module/stage. This
parameter is only effective if a signal is
assigned to the corresponding global
protection parameter. If the signal becomes
true, those modules/stages are blocked that
are parameterized "ExBlo Fc=active".
inactive,
active
inactive [Protection
Para
/<1..4>
/V-Prot
/V[1]]
Blo TripCmd Permanent blocking of the Trip Command of
the module/stage.
inactive,
active
inactive [Protection
Para
/<1..4>
/V-Prot
/V[1]]
ExBlo TripCmd
Fc
Activate (allow) or inactivate (disallow)
blocking of the module/stage. This
parameter is only effective if a signal is
assigned to the corresponding global
protection parameter. If the signal becomes
true, those modules/stages are blocked that
are parameterized "ExBlo TripCmd
Fc=active".
inactive,
active
inactive [Protection
Para
/<1..4>
/V-Prot
/V[1]]
Measuring
Mode Measuring/Supervision Mode: Determines if
the phase-to-phase or phase-to-earth
voltages are to be supervised
Phase to
Ground,
Phase to Phase
Phase to
Ground [Protection
Para
/<1..4>
/V-Prot
/V[1]]
Measuring
method Measuring method: fundamental or rms or
"sliding average supervision" Fundamental,
True RMS,
Vavg
Fundamental [Protection
Para
/<1..4>
/V-Prot
/V[1]]
830 MCDLV4 DOK-HB-MCDLV4-2E