Woodward HighPROtec MCDLV4, Manual

Page: 463 / 1275

Field Parameters
Parameter Description Setting range Default Menu path
IL1, IL2, IL3
Cutoff Level
The Current shown in the Display or within
the PC Software will be displayed as zero, if
the Current falls below this Cutoff Level.
This parameter has no impact on recorders.
0.0 - 0.100In 0.005In [Device Para
/Measurem
Display
/CT Local]
IG meas Cutoff
Level The measured Earth Current shown in the
Display or within the PC Software will be
displayed as zero, if the measured Earth
Current falls below this Cutoff Level. This
parameter has no impact on recorders.
0.0 - 0.100In 0.005In [Device Para
/Measurem
Display
/CT Local]
IG calc Cutoff
Level The calculated Earth Current shown in the
Display or within the PC Software will be
displayed as zero, if the calculated Earth
Current falls below this Cutoff Level. This
parameter has no impact on recorders.
0.0 - 0.100In 0.005In [Device Para
/Measurem
Display
/CT Local]
I012 Cutoff
Level The Symmetrical Component shown in the
Display or within the PC Software will be
displayed as zero, if the Symmetrical
Component falls below this Cutoff Level.
This parameter has no impact on recorders.
0.0 - 0.100In 0.005In [Device Para
/Measurem
Display
/CT Local]
Remote Protective Device
Parameter Description Setting range Default Menu path
CT pri Nominal current of the primary side of the
current transformers.
This setting accords to the local CT setting
of the Remote Device.
NOTE: This setting should be identical with
"Local CT" setting of Remote Device.
1 - 50000A 1000A [Field Para
/CT Remote]
463 MCDLV4 DOK-HB-MCDLV4-2E