Welch Allyn Connex IWS, Directions For Use Manual

Page: 51 / 266

Recommendation: Place the mounting rail bracket 63 in. (1.6 m) from the floor,
which places screen center height at approximately 63 in. (1.6 m) from the floor.
CAUTION
This drawing shows the physical relationships of
the mounting brackets to each other and to the wall system
after you complete the mounting instructions. Do not place
the wall system on the wall until you have completed all
preliminary steps.
2. Affix the mounting rail bracket to three studs at the selected height using the
available screws (anchors are provided for additional support).
CAUTION Ensure that the upper "lip" of the bracket sticks
out from the wall and that the bracket is level.
3. Route the power cord through the channel in the back of the accessory bin bracket,
then mount the bracket on the center stud at least 13 in. (33 cm) below the
mounting rail bracket.
Directions for use Setup 45