Welch Allyn Connex IWS, Directions For Use Manual

Page: 149 / 266

Set up NIBP intervals
Follow these steps to configure NIBP intervals.
1. Touch the Settings tab.
2. Touch the Setup tab.
3. Touch the Intervals vertical tab.
4. Select Automatic , Program , or Stat , and follow the steps presented in the
associated topics that follow.
5. To automatically print patient data at each interval, touch the Automatic print on
interval checkbox.
6. To start intervals immediately, touch Start intervals . Otherwise, touch the Home
tab.
The new settings take effect immediately.
Automatic intervals
You can configure the monitor to take automatic NIBP measurements at consistent
intervals. Use the spin box or keypad to set the desired interval.
Note
An alarm does not turn off intervals. Subsequent automatic measurements
continue to occur as scheduled.
Start automatic intervals
Follow these steps to configure the monitor to take NIBP measurements at consistent
intervals.
1. Properly size the blood pressure cuff and position it around the patient’s bare upper
arm.
2. On the Home tab, touch .
3. Select
Automatic
.
4. Use the numeric keypad to enter the length of time between NIBP measurements.
5. Touch
Start intervals
.
Directions for use Patient monitoring 143