Welch Allyn Connex IWS, Directions For Use Manual

Page: 102 / 266

Note
Event data (e.g., physiological alarms, patient movement,
manual NIBP or temperature measurements, Manual
parameter entries) is displayed in all trend intervals. By
modifying the trend interval to one of the longer time spans,
you can filter out non-alarming, continuous measurements
between the currently selected time intervals to focus more
attention on event data. Alternatively, you can modify the
trend interval by selecting a shorter time span to display a
more comprehensive listing of continuous measurements.
3. Use the scroll bar on the right to view patient measurements for any parameters that
do not fit in the display area.
4. Touch the page forward and page backward controls in the table header
to view additional measurements for this patient. The most recent measurements
appear on the right of the table, with older measurements to the left.
5. Touch the graphical trends button to view a graphical representation of
patient measurements recorded in the tabular trends table.
6. Touch the tabular trends button to return to the tabular view.
7. Touch
Print
to print the patient's record.
A Print options dialog appears.
8. Select the desired Timespan and touch
Print
.
Note
If no patient is selected, the Continuous Monitoring profile is not active,
and no measurements have been taken, all table cells in the Review tab
remain blank.
Note In the Continuous Monitoring profile, you cannot delete saved patient
measurements. Patient measurements older than 24 hours are
automatically deleted from the Review tab.
Note The date and time stamps on saved patient measurements will adjust in
response to new date and time settings.
96 Patient data management Welch Allyn Connex
®
Devices