Welch Allyn Connex IWS, Directions For Use Manual

Page: 50 / 266

6 x
• Mounting rail bracket
• Accessory bin bracket
• Screws
Tools list
Use these tools to mount the wall system.
•
#2 Phillips screwdriver
• level
• tape measure
• stud finder
• drill
• 1/8-inch (3.17 mm) diameter drill bit
Mounting location
Before mounting the wall system, consider the following recommendations to determine
the best mounting location:
•
Mount the wall system to studs.
• Mount the wall system within reach of the AC power outlet. The power cord is 8 ft.
(2.44 m) long.
• Avoid brightly lit areas.
• Blood pressure tubing is 8 ft. (2.44 m) long.
• Position the wall system so that all instruments are accessible and in a location that
allows for ergonomic examinations.
Sample room layout
1
2
r
1. Connex Integrated Wall System
2. Examination table
Mount the wall system
1. On the selected wall, find and mark the studs, and choose the system height and
corresponding height for the mounting rail bracket.
44 Setup Welch Allyn Connex
®
Devices