Welch Allyn Connex IWS, Directions For Use Manual

Page: 197 / 266

• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit .
Specify advanced device settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code .
d. Touch OK .
The General tab appears.
2. Touch the Device tab.
3. Specify settings.
Option Description
Location ID Touch and enter up to 20 alphanumeric
characters.
Enable Save as default Select to enable display of the Save as default control.
Pause Mode timeout Specify the default timeout used when entering Pause
mode in the Continuous Monitoring profile.
Power line frequency Specify power line frequency for AC power supplied to
the device.
Available profiles Specify the profiles to be available for selection.
Allow profile change Select to enable manual selection of different profiles
and the automatic shift to the Continuous Monitoring
profile when a continuous sensor is connected to a
patient.
When disabled, the current profile selection in the
Settings tab is locked in. No other profile selection
buttons are available, and the device does not
automatically shift to the Continuous Monitoring profile
when a continuous sensor is connected to a patient.
Default profile Specify the default profile to be used at startup in the
following Continuous Monitoring profile workflows: 1)
patient trend data has not been saved, and 2) patient
trend data has been saved and the user selects a new
patient.
4. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit .
Set and start the demo mode
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code .
d. Touch OK .
Directions for use Advanced settings 191