Welch Allyn Connex IWS, Directions For Use Manual

Page: 142 / 266

Button name Button image Description
Touch to start a manual measurement or a cycle of
automatic measurements.
Touch to stop a measurement that is in progress.
In the Office profile,
• Touch to stop a manual NIBP measurement.
• Touch to stop the current measurement and stop
an NIBP averaging program.
Interval - Continuous Monitoring, Intervals Monitoring, and Spot Check profiles
This button shows the status of automatic measurements.
Touch the button to display the Intervals tab, where you can configure automatic
measurements.
Automatic measurements are off.
Automatic measurements are on.
Interval - Office profile
Touch the button to display the Intervals tab, where
you can start an NIBP averaging program.
• Touch to access the Intervals tab, where you can
stop the NIBP averaging program.
• Counts down to the next measurement in an
NIBP averaging program.
Alarm Limit control This button displays alarm status. It also displays alarm limits in some device
configurations.
Touch the button to display the Alarms tab.
Select a cuff
WARNING
Use only blood pressure cuffs and hoses listed as approved
accessories to ensure safe and accurate NIBP measurements.
136 Patient monitoring Welch Allyn Connex
®
Devices