Welch Allyn Connex IWS, Directions For Use Manual

Page: 95 / 266

a. Remove continuous sensors from your patient.
b. On the Settings tab, touch the
Monitor tab.
c. Touch End monitoring .
An "End monitoring" dialog appears with the following options:
• New patient – Clears patient and location context and review data
• Power down – Clears patient and location context and review data, and
powers down the device
• Cancel – Retains patient data and returns to Home tab
Note
Ending monitoring deletes all patient measurement data
from the device.
d. Select the desired option and touch
OK
.
The Home tab appears.
e. Repeat step 1 and select the desired profile on the Profile vertical tab.
The profile change immediately takes effect.
4.
When patient and/or location context are established, but no episodic or
continuous trend data has been stored:
a. Select the desired profile.
A confirmation dialog appears asking you to confirm the patient and/or location
context information or select a new patient. For example, if both patient and
location context have been established, the following options appear:
• Same patient, same location
• Same patient, different location
• New patient
b. Select the desired option and touch
OK
.
The profile change immediately takes effect.
Note If the device was connected to a central station while the Continuous
Monitoring profile was active, changing to any other profile disconnects the
device from the central station.
Directions for use Profiles 89