Welch Allyn Connex IWS Directions For Use Manual Download Page 243

Page: 243 / 266

Monitors capable of supporting a combination of NIBP, SpO2, SpHb, pulse rate,
and temperature

Model

Description

6300

Basic. Includes USB and Ethernet connectivity.

Note

This manual applies to 6300 models upgraded to 2.0X–2.3X software. The 6300
model is no longer available for sale.

6400

Standard. Includes nurse call, Ethernet, and USB connectivity. The radio is optional.

6500

Wireless. Includes all Standard features plus an internal 802.11 a/b/g radio.

Monitors capable of supporting a combination of CO2/RR or RRa or EarlySense
(patient movement), NIBP, SpO2, SpHb, pulse rate, and temperature

Model

Description

6700

Standard. Includes nurse call, Ethernet, and USB connectivity. The radio is optional.

6800

Wireless. Includes all Standard features plus an internal 802.11 a/b/g radio.

Integrated Wall System

The wall system is available in the following configurations.

Model

Prefix

Description

84 series

Standard. Includes nurse call, Ethernet, and USB connectivity.

85 series

Wireless. Includes all Standard features plus an internal 802.11 a/b/g radio.

Directions for use

Specifications 237

Summary of Contents for Connex IWS











































































































































































































































































Search results

Summary of Contents for Connex IWS

Reviews:

Related manuals for Connex IWS

Brands by name

Popular brands

Welch Allyn Connex IWS, Directions For Use Manual

Search results

Summary of Contents for Connex IWS

Reviews:

Related manuals for Connex IWS

Brands by name

Popular brands