Welch Allyn Connex IWS, Directions For Use Manual

Page: 182 / 266

The Manual tab appears.
2. Touch the keypad icon in selected fields to open the numeric keypad, and then
manually adjust height, weight, pain level, temperature, respiration rate, or other
parameters.
Note
If an approved, battery-powered weight scale is attached to
the monitor, measurements from the weight scale populate
fields in the Manual tab. You can adjust weight and height
measurements on this tab, but if you do, the read-only BMI
field will clear.
Note Ensure that the current patient ID is correct before saving.
3. Touch
OK
to confirm settings and return to the Home tab.
Note
In the Intervals Monitoring and Spot Check (episodic)
profiles, manual parameters clear from the Home tab after a
successful save.
Note When the device is connected to a central station and in the
Continuous Monitoring profile, all manual parameters except
temperature will be sent to the central station when you
touch
OK .
Physical assessment instrument handles
Use the physical assessment instrument handles
The handles supply power to Welch Allyn 3.5V instruments. This section focuses on
operation of the handles only. Refer to the directions for use for each instrument head to
use it properly.
Note
Handle modules are available only in the 84- and 85-series models.
Ensure the wall system is plugged in.
1. Lift the handle you want to use from the handle cradle.
176 Patient monitoring Welch Allyn Connex
®
Devices