Welch Allyn Connex IWS, Directions For Use Manual

Page: 251 / 266

Guidance and manufacturer's declaration
EMC compliance
Special precautions concerning electromagnetic compatibility (EMC) must be taken for all
medical electrical equipment. This device complies with IEC EN 60601-1-2:2007.
•
All medical electrical equipment must be installed and put into service in accordance
with the EMC information provided in the referenced IEC standard and this
directions for use.
• Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The monitor complies with all applicable and required standards for electromagnetic
interference.
•
It does not normally affect nearby equipment and devices.
• It is not normally affected by nearby equipment and devices.
• It is not safe to operate the monitor in the presence of high-frequency surgical
equipment.
• However, it is good practice to avoid using the monitor in extremely close proximity
to other equipment.
Emissions and immunity information
For information about electromagnetic compatibility (EMC), see the Welch Allyn website:
http://www.welchallyn.com/apps/products/product_category.jsp?catcode=PMS
245