Welch Allyn Connex IWS Directions For Use Manual Download Page 193

Page: 193 / 266

Advanced settings

The Advanced tab provides password-protected access to the monitor's Advanced

settings (or Admin mode), enabling nurse administrators, biomedical engineers, and/or

service engineers to configure specific features. The Advanced tab also presents read-

only information about the monitor.

Note

You cannot enter the Advanced settings if sensors or physiological alarms
are active or if vital sign measurements are displayed.

General

Specify the language

1. Access the Advanced Settings.

a. Touch the

Settings

tab.

b. Touch the

Advanced

tab.

c. Enter the

Advanced settings code

d. Touch

The General tab appears, displaying the Language tab.

2. Select a language.
3. Do one of the following:

•

To continue in the Advanced Settings, touch another tab.

•

To exit the Advanced Settings and return to the Home tab, touch

Exit

187

Summary of Contents for Connex IWS











































































































































































































































































Search results

Summary of Contents for Connex IWS

Reviews:

Related manuals for Connex IWS

Brands by name

Popular brands

Welch Allyn Connex IWS, Directions For Use Manual

Search results

Summary of Contents for Connex IWS

Reviews:

Related manuals for Connex IWS

Brands by name

Popular brands