Welch Allyn Connex IWS, Directions For Use Manual

Page: 203 / 266

5. (Optional) Change the name of the program:
a. Touch the keyboard icon.
b. Enter the name of the program and touch
OK
.
6. Specify the settings for this program.
Setting Action/Description
Readings to average Select readings to include in the average. You must
select at least two readings.
The last reading you select is the final reading of the
program. For example, if you select Readings 3, 4, and 5,
the program takes five readings.
Unselected readings—in this example, Readings 1 and 2
—are excluded ("discarded") from the average.
Delay to start Enter the period between the start of the program (the
moment that the "Start intervals" button is selected) and
the start of the first reading.
Time between Enter the period between the end of one reading and the
start of the next reading.
Keep if + or - Enter the range that the program uses to establish the
baseline reading. For more information about how this
setting affects the program, refer to the section
"Excluded readings" below.
The settings you selected appear in the Summary area.
7. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch
Exit
.
The program is now available for use.
Specify advanced temperature settings
1. Access the Advanced Settings.
a. Touch the
Settings
tab.
b. Touch the
Advanced
tab.
c. Enter the
Advanced settings code
.
Directions for use Advanced settings 197