Welch Allyn Connex IWS, Directions For Use Manual

Page: 196 / 266

audio and visual signals occur (EarlySense
configuration).
etCO2 alarm condition delay Specify the minimum amount of time that an etCO2
alarm condition must be active before audio and visual
signals occur.
Respiration alarm condition delay Specify the minimum amount of time that an RR alarm
condition must be active before audio and visual signals
occur.
No breath detected alarm delay If configured with a CO2 module, specify the amount of
time for the device to wait after receiving a "valid
breath" message before activating the "No breath
detected" physiological alarm.
If configured for RRa, specify the time that the Masimo
module will wait before sending a respiration pause
event, which will result in a "No breath detected"
physiological alarm.
Adult no breath detected alarm delay Specify the time that an adult no breath detected
condition must be active in an Oridion CO2 configuration
before audio and visual signals occur.
Pediatric no breath detected alarm delay Specify the time that a pediatric no breath detected
condition must be active in an Oridion CO2 configuration
before audio and visual signals occur.
Neonate no breath detected alarm delay Specify the time that a neonate no breath detected
condition must be active in an Oridion CO2 configuration
before audio and visual signals occur.
4. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit .
Specify advanced display settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code .
d. Touch OK .
The General tab appears.
2. Touch the Display tab.
3. Specify settings.
Setting Action/Description
Display lock Specify the required period of clinician inactivity before
the touchscreen locks.
Display power saver Specify the required period of monitor inactivity before
the display turns off.
Clinician interactions, new vital sign measurements, or
alarm conditions automatically turn on the display.
Device power down Specify the required period of monitor inactivity before
the monitor turns off.
4. Do one of the following:
190 Advanced settings Welch Allyn Connex
®
Devices