VeEX RXT-6000e User Manual Download Page 114

Page: 114 / 387

PM TTI Type

Go back to top

Go back to TOC

TCMi:

There are six Tandem Connection Monitoring (TCMi) fields that define the ODU TCM sub-layer, each

containing TTI, BIP-8, BEI/BIAE, BDI, and STAT subfields associated to each TCM level (i=1 to 6).

The STAT subfield is used in the PM and TCMi fields to provide an indication of the presence or absence

of maintenance signals.

TCM1 BEI Type

Go back to top

Go back to TOC

Fault Type and Fault Location (FTFL)

Reporting communication channel field used to create a message spread over a 256-byte multiframe

Provides the ability to send forward and backward path-level fault indications

RXT-6200_RXT6000e_Module_Manual

Page 114 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands