VeEX RXT-6000e User Manual Download Page 82

Page: 82 / 387

and stored. The Elapsed Time [ET] is shown in the right hand corner of the header. Error conditions are displayed in

red including count and rate.

Errors/Alarms (Page 2)

Errors/Alarms (Page 3)

Page 3 lists the Section and Line Overhead Alarms in logical order associated with the signal under test. All alarms are

evaluated and stored. The Elapsed Time [ET] since the start of the test is shown in the upper right hand corner.

Errors/Alarms (Page 3)

The alarms associated with the Section and Line are displayed separately for ease of interpretation.

Go back to top

Go back to TOC

Errors/Alarms (Page 4 & 5)

Page 4 & 5 lists the STS Path and VT path in logical order that are associated with the signal under test. All alarms are

evaluated and stored.

RXT-6200_RXT6000e_Module_Manual

Page 82 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands