VeEX RXT-6000e User Manual Download Page 191

Page: 191 / 387

12.2 Home Menu and Switch Test Mode

The Home menu can be accessed at anytime during operation by pressing the

Home

key

on the rubber

keypad. The screen is divided into three presentation areas:

1 - Left:

LEDs:

Displays soft LEDs associated with Errors and Alarms

Tools:

IP connection status, Advanced IP features (Net Wiz, WiFi Wiz, VoIP, and IPTV applications)

Utilities:

Applications (Help, Settings, Files) which are common to all VePAL handheld test sets

2 - Middle:

Test Applications specific to the test set (Setup, Alarm/Error, OTN Tools, RFC 2544, BERT, Throughput)

Setup to configure test interfaces

3 - Right:

Test mode:

Selects to the test interface(s)

Laser On/Off:

Enables/Disables the Laser transmitter on optical ports

OTUx Home Menu

OTUx Home Menu with Ethernet Options

RXT-6200_RXT6000e_Module_Manual

Page 191 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands