VeEX RXT-6000e User Manual Download Page 300

Page: 300 / 387

Mode:

Lists Active or Passive mode configuration.

Supported and unsupported capabilities advertised during Discovery are listed, including: Unidirection, Link Events,

Remote Loopback, MIB Retrieval, and MTU Size.

OAM - Link - Discovery (Page 2)

Vendor SPI and OUI:

Organization Unique identifier and Vendor specific information (similar to MAC address

fields).

Discovery State:

Send Any indicates the device was successfully discovered.

Parser/Multiplexer state:

Forward indicates the device is forwarding regular traffic transmission.

Loopback/drop

indicates loopback is enabled.

Flags:

Flag decode is listed in the graphic below.

Revision:

Number of times the configuration has been modified since discovery.

Flag Decode

RXT-6200_RXT6000e_Module_Manual

Page 300 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands