VeEX RXT-6000e User Manual Download Page 259

Page: 259 / 387

CIR Test Config

Go back to top

Go back to TOC

13.4.1.1 Header Settings

Service #:

Select a service to configure

Service Name:

Assign a name to the service if desired.

Frame Size Type:

Fixed or EMIX (1GE only). A fixed frame size is chosen as default

Frame Size:

For Fixed Traffic Flow:

Input a fixed frame size within the range of 64-10000 bytes by tapping the value

box.

For EMIX (1GE only):

The default value is abceg. Tap the zoom (magnifying glass) icon to define other

values. Select the values from the drop down lists on the next screen.

Any EMIX configuration of 5 frames is allowed.

Encapsultaion Type:

None or

Provider Backbone Bridge (PBB-TE):

Provider Backbone Bridge MAC-in-

MAC (IEEE 802.1ah) encapsulation are configured trunks that add resiliency and configurable performance

levels in the provider backbone network. Available for 1GE Copper/Fiber and 10GE port. PBB encapsulation is

available for all Ethernet tests (Layer 2,3 and 4) - BERT, RFC2544, Throughput, V-SAM.

Tap the PBB block to configure the settings. All PBB fields are configurable.

Backbone MAC Source

Backbone MAC Destination

Ethernet Type

I-SID

Backbone VLAN ID, Priority, Type

Please see

15.3 RFC 2544 Setup

and follow the setup procedure to configure the remaining Header Settings for V-

SAM.

RXT-6200_RXT6000e_Module_Manual

Page 259 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands