VeEX RXT-6000e User Manual Download Page 11

Page: 11 / 387

1.0 About This User Manual

This user manual is suitable for novice, intermediate, and experienced users and is intended to help you successfully

use the features and capabilities of the various modules for test platforms. It is assumed that you have basic computer

experience and skills, and are familiar with IP and telecommunication concepts, terminology, and safety.

Every effort was made to ensure that the information contained in this manual is accurate. However, information is

subject to change without notice. We accept no responsibility for any errors or omissions. In case of discrepancy, the

web version takes precedence over any printed literature.

Inc. and/or its affiliates in the USA and certain other countries. All trademarks or registered trademarks are the

property of their respective companies. No part of this document may be reproduced or transmitted electronically or

otherwise without written permission from VeEX Inc.

This device uses software either developed by VeEX Inc. or licensed by VeEX Inc. from third parties. The software is

confidential and proprietary of VeEX Inc. The software is protected by copyright and contains trade secrets of VeEX

Inc. or VeEX's licensors. The purchaser of this device agrees that it has received a license solely to use the software as

embedded in the device, and the purchaser is prohibited from copying, reverse engineering, decompiling, or

disassembling the software.

For more technical resources, visit the VeEX Inc. web site at

www.veexinc.com

. For assistance or questions related to

the use of this product, call or e-mail our customer care department for customer support. Before contacting our

customer care department, have the product model, serial number, and software version ready. Please locate the serial

number on the back of the chassis. Please provide this number when contacting VeEX customer service.

Customer Care:

Phone: + 1 510 651 0500

RXT-6200_RXT6000e_Module_Manual

Page 11 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands