VeEX RXT-6000e User Manual Download Page 195

Page: 195 / 387

Pattern Setup

PRBS Pattern:

Use the pattern drop-down box to select the test pattern which will be inserted into the

transmitted signal. Pseudo Random Bit Sequences (PRBS) defined by ITU-T 0.150 and 0.151 standards, fixed

words and 24-bit or 32 bit user defined patterns are available. Note, if the 32 bit user pattern entered is incorrect,

the default pattern will be 0xFFFFFFFF.

Invert:

Inversion of PRBS polarity is also available. Inversion of fixed words is not permitted.

Go back to top

Go back to TOC

12.3.2 Measurements

Measurements tab

Manual mode is chosen as the default configuration for starting/stopping the test.

Go back to top

Go back to TOC

12.3.3 General

RXT-6200_RXT6000e_Module_Manual

Page 195 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands